OpenBCI 32 bit board with OpenViBE 0 host connected error.
Posted: Tue Dec 20, 2016 7:32 pm
Hi There...
i am using this V3 OpenBCI 32 bit board 8 channels with OpenViBE 1.2.2 which is stable now with the board. but the acquisition server isn't recognizing the board and gives 0 Host Connected. I've done the FTD driver settings described here and on openBCI page but the problem remains the same. I would like to request help on the matter Please.
Following are the errors i receive during acquisition phase...
[ INF ] OpenBCI: Successfully opened port [\\.\COM4]
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Soft reseting of the board...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 1681ms)
[ INF ] Connection succeeded !
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[ INF ] Disconnecting.
----------------------------------------------------------------------------------------------------------------------------------
[ INF ] Connecting to device [OpenBCI]...
[ INF ] OpenBCI: Configured 'missing sample delay before reset' to 1000 ; this
can be changed in the openvibe configuration file setting the AcquisitionDriver
_OpenBCI_MissingSampleDelayBeforeReset token
[ INF ] OpenBCI: Configured 'dropped sample count before reset' to 5 ; this ca
n be changed in the openvibe configuration file setting the AcquisitionDriver_Op
enBCI_DroppedSampleSafetyDelayBeforeReset token
[ INF ] OpenBCI: Configured 'dropped sample safety delay before reset' to 1000
; this can be changed in the openvibe configuration file setting the Acquisitio
nDriver_OpenBCI_DroppedSampleSafetyDelayBeforeReset token
i am using this V3 OpenBCI 32 bit board 8 channels with OpenViBE 1.2.2 which is stable now with the board. but the acquisition server isn't recognizing the board and gives 0 Host Connected. I've done the FTD driver settings described here and on openBCI page but the problem remains the same. I would like to request help on the matter Please.
Following are the errors i receive during acquisition phase...
[ INF ] OpenBCI: Successfully opened port [\\.\COM4]
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Soft reseting of the board...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 1681ms)
[ INF ] Connection succeeded !
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[WARNING] No response for 1000ms, will try recovery now (Note this may eventuall
y be hopeless as the board may not reply to any command either).
[ INF ] OpenBCI: Stopping board streaming...
[ INF ] OpenBCI: Starting stream...
[ INF ] OpenBCI: Status ready (initialization took 604ms)
[ INF ] Disconnecting.
----------------------------------------------------------------------------------------------------------------------------------
[ INF ] Connecting to device [OpenBCI]...
[ INF ] OpenBCI: Configured 'missing sample delay before reset' to 1000 ; this
can be changed in the openvibe configuration file setting the AcquisitionDriver
_OpenBCI_MissingSampleDelayBeforeReset token
[ INF ] OpenBCI: Configured 'dropped sample count before reset' to 5 ; this ca
n be changed in the openvibe configuration file setting the AcquisitionDriver_Op
enBCI_DroppedSampleSafetyDelayBeforeReset token
[ INF ] OpenBCI: Configured 'dropped sample safety delay before reset' to 1000
; this can be changed in the openvibe configuration file setting the Acquisitio
nDriver_OpenBCI_DroppedSampleSafetyDelayBeforeReset token