Acquisition server still not working with Biosemi Active Two

Obtaining data from various hardware devices
Post Reply
kjantzen
Posts: 3
Joined: Tue Nov 24, 2015 7:22 pm

Acquisition server still not working with Biosemi Active Two

Post by kjantzen »

I am trying to use OpenViBE to read and analyze data in real time from a Biosemi Active Two Mark II. The Acquisition server (V1.1.0) recognizes my peripheral and indicates that the connection status is fine. However, when I try to connect to the Active Two so I can begin to send data to the Designer I get the following error. "An error occurred while dropping unused samples at initialization time." which causes the connection to fail.

The acquisition aborts without the Device information window popping up. I have verified that the CMS and DRL are in range. Biosemi's Actiview software also reads from the hardware on the same machine. I have tried the same procedure on a 32 and 64 bit windows 7 platform with the same results.

Has anyone had a similar problem or have advice on getting open vibe to work with Biosemi hardware?


Thanks in advance.

KJ

Post Reply