thanks again for yr help, Jussi.
finally, I succeded to get data from cognionics to the OV-Designer: I'll describe the successful process below, to make it available to other users.
before, let me ask you
concerning yr Statement:
By choosing some specific log level in a box selects which category it will send its logs out as
:is there any docu explaining which log-Level is helpful for which purpose?
ok, now
back to the acq Server:
reason is that the user forgot to press 'Play' in the AS. It might also be some firewall problem
in fact, the error mssg stemmed from one "play-less" Trial. No Firewall-prob.
the process described below works in my Environment (win8.1, Cog-Mini2 170).
I'm not sure, however, if really all Settings are mandatory.
Set up BT-connection:
- Pairing the Cog-Mini2 170 acknowledging the code, presented by the BT-setup program (not with “0000” or “1234”).
Find out the COM-port# for “Standard Serial BT” (e.g.8 )
Configuration settings in the device manager for the COM-port# :
- Bit/s = 57600
Advanced:
Box “fifo 16550” OFF
Set the Size of the 2 buffers to minimum
Implement a Signal Stream using the Cognionics Connector “cognionics.exe”:
- Download “Cognionics-1.05.1.zip” from ftp://sccn.ucsd.edu/pub/software/LSL/ > ALT / view / open FTP-Site in Explorer/ Apps, unzip
Execute “cognionics.exe” (instructions under https://code.google.com/p/labstreamingl ... /Cogionics)
Click “unlink”-box if shown
Enter COM-port#, sampling rate (e.g. 300), number of channels (all channels, also the trigger channels = 4 @ 2 data channels) and the channel labels (dummy names allowed).
These settings can be saved via click on “file”
Click “link”-box
Call the OV-acq-server 1.0.0 >
- “Driver Properties”: in “Device Configuration”, “signal Stream” the name of the Cognionics-LSL-connector should show up > apply
“Settings”: change “Drift Tolerance” to 4 ms
CONNECT
PLAY
Call the OV-Designer 1.0.0 >
- Open your scenario, start it
Set parameters in an evtl. Raw-data-display to AUTO (per channel).
that was it!
Now you could add another
helpful advice, Jussi:
do you have any
batch-file to call OV-acq Server and OV-Designer plus additional programs (such as cognionics.exe and AHK) with ONE COMMAND ?
best rds
P.B.