Search found 46 matches
- Tue May 31, 2011 12:02 pm
- Forum: Acquisition server and drivers
- Topic: To build the connection with MicroMed
- Replies: 5
- Views: 6925
Re: To build the connection with MicroMed
Dear Elsa88Joseph, Thank you for your interest in OpenViBE and welcome on this board. The System PLUS Evolution software is compatible only on the Windows operating systems and the methods used to interpret the micromed data are contained only on a DLL. Consequently, you can use the driver micromed ...
- Mon May 16, 2011 8:09 am
- Forum: Discussion about OpenViBE
- Topic: CSV reader not available
- Replies: 18
- Views: 20705
Re: CSV reader not available
Dear pickku, In your file, you have 1000 lines and I think you used a sampling rate equal to 512, that's why you have a very short signal. Exactly, your signal is visible for 1,95 second, because you read 512 lines per second. If the link3_blink3 file was recorded with the same sampling rate as the ...
- Fri May 13, 2011 8:41 am
- Forum: Discussion about OpenViBE
- Topic: CSV reader not available
- Replies: 18
- Views: 20705
Re: CSV reader not available
Dear pickku, You can find 2 scenarios and a CSV file examples. This can give you an example of the structure of the CSV file to use. As jLegeny says, The file you have sent (blink3_blink3.csv), need few modification to be used by the CSV reader. In your file, the columns Time and sampling rate was m...
- Mon May 09, 2011 8:23 am
- Forum: Discussion about OpenViBE
- Topic: CSV reader not available
- Replies: 18
- Views: 20705
Re: CSV reader not available
Dear Pickku Thank you for your scenario. Can you check if the separator of your file is the same as the separator defined in your csv box settings. Because in files you sent, the csv file used a separator “,” and the separator defined in your scenario is “;”. When I try with an other csv file, I hav...
- Mon Mar 14, 2011 9:12 am
- Forum: Acquisition server and drivers
- Topic: External triggers
- Replies: 5
- Views: 10859
Re: External triggers
Dear R0MA1N I made some modifications for the TMSI device and I sent it on the forge. Now it's possible to use external trigger with this device, but I haven't got the trigger system for it, so I haven't tested it and I don't know if it running well. Could you test it and give me some feedback, than...
- Tue Mar 08, 2011 10:50 am
- Forum: Boxes
- Topic: Classifier Processor Usage with more than 2 classes.
- Replies: 21
- Views: 28871
Re: Classifier Processor Usage with more than 2 classes.
Dear eeg, Thank you for your interest in OpenViBE and welcome on this forum Actually, the classifier processor can't classify more than 2 classes. At the moment, I'm working on SVM to add the possibility to modify parameters of the SVM algorithm rather than always use the default parameters. Current...
- Mon Mar 07, 2011 3:54 pm
- Forum: Acquisition server and drivers
- Topic: To build the connection with MicroMed
- Replies: 5
- Views: 6925
Re: To build the connection with MicroMed
Dear EdwardYANG, Thank you for your interest in OpenViBE and welcome on this forum. To build a connection with Micromed, System PLUS Evolution is not enough. You need to buy the option SW EEG BCI. This application is installed in your BQUSB Micromed Interface. it is mandatory to receive data by TCP/...
- Wed Feb 09, 2011 5:20 pm
- Forum: Acquisition server and drivers
- Topic: External triggers
- Replies: 5
- Views: 10859
Re: External triggers
Dear R0MA1N, I'm sorry for this late response. I haven't got trigger's materials but I just found few information about it. Finally, triggers are displayed by Openvibe but not as a stimulation, they are integrated in the signal. If you display all channel in a signal display, you can see a signal re...
- Tue Feb 08, 2011 3:07 pm
- Forum: Scenarios and BCI design
- Topic: How to test "3x3 Matrix" with P300-speller-xDAWN and Emotiv
- Replies: 9
- Views: 19439
Re: How to test "3x3 Matrix" with P300-speller-xDAWN and Emo
Dear davidchung, I tested the P300-speller-xDAWN with a 3x3 matrix, and I hadn't problems. I saw targets and results flashes. Your files, p300-stimulation-targets.xml and p300-speller-stimulator.cfg, are good so, if you haven't got problems about classifier processor and spatial filter, I think the ...
- Fri Jan 21, 2011 11:35 am
- Forum: Scenarios and BCI design
- Topic: How to test "3x3 Matrix" with P300-speller-xDAWN and Emotiv
- Replies: 9
- Views: 19439
Re: How to test "3x3 Matrix" with P300-speller-xDAWN and Emo
Dear DavidChung, I was able to create GtkImage objects in the 3x3 matrix with the path information in the pixbuf property. However, when I run the acquisition scenario, I see the 3x3 matrix with my images on the screen, but the rows and columns of the matrix do not flash. What further changes do I n...
- Wed Jan 19, 2011 9:57 am
- Forum: Scenarios and BCI design
- Topic: How to test "3x3 Matrix" with P300-speller-xDAWN and Emotiv
- Replies: 9
- Views: 19439
Re: How to test "3x3 Matrix" with P300-speller-xDAWN and Emo
Dear Davidchung For your modifications on the file p300-speller-stimulation.cfg, I don't see any problems on it, but for the training phase, I think it's better to keep 12 repetitions to have a better classification. You are right for the file p300-speller-visualisation.cfg, you needn't to do modifi...
- Thu Jan 13, 2011 11:03 am
- Forum: Scenarios and BCI design
- Topic: How to Test P300 Magic Card using Emotiv EPOC headset
- Replies: 5
- Views: 6926
Re: How to Test P300 Magic Card using Emotiv EPOC headset
Dear davidchung, I used your scenarios and I hadn't got problem to run them. In the second scenarios the cards are flashed, but I have made few modifications in the first scenarios for this. This scenario has two running modes and it is composed to three part. The first is a read file, to replay a r...
- Wed Jan 12, 2011 2:19 pm
- Forum: Scenarios and BCI design
- Topic: How to Test P300 Magic Card using Emotiv EPOC headset
- Replies: 5
- Views: 6926
Re: How to Test P300 Magic Card using Emotiv EPOC headset
Dear davidchung Thank you for your logs. I looked them and it seems that no box had a problem, so it's possible the problem come to the data of your file. I think you had tried the step 2 with the default file “bci-p300-magic-card.ov“ and all was right. Could you send me your file “current-[2011.01....
- Thu Jan 06, 2011 9:17 am
- Forum: Scenarios and BCI design
- Topic: How to Test P300 Magic Card using Emotiv EPOC headset
- Replies: 5
- Views: 6926
Re: How to Test P300 Magic Card using Emotiv EPOC headset
Dear davidchung You're right, the p300-magic-card is similar as the p300-speller-xDAWN, but you haven't the step for learn the spatial filter. The first step is the acquisition with the scenario p300-magic-card-1-acquisition. The target is the picture with a green border. The second step is the trai...
- Thu Dec 16, 2010 3:54 pm
- Forum: Discussion about OpenViBE
- Topic: Few different questions (2/3 class, gdf, datasets)
- Replies: 15
- Views: 21786
Re: Few different questions (2/3 class, gdf, datasets)
Dear dumoulinj, The “classifier trainer” stimulation input is used to know when all epochs was received. The training start when this input receive the stimulation defined by the "Train trigger" parameter. The “classifier trainer” has 2 or more “Feature vector” inputs, whether one per class. In your...